Your East Wood Design piece is handcrafted from solid timber and finished with Osmo Poly Wax Oil, a natural, hardwearing finish made from plant oils and waxes. It penetrates and protects the wood while letting the natural grain and character show through. With the right care, it will look beautiful for years to come.
Everyday Care
- Dust regularly with a soft, dry or slightly damp cloth.
- Wipe up spills promptly with a dry or barely damp cloth.
- For general cleaning, use a well-wrung cloth with warm water — avoid soaking the surface.
What to Avoid
- Avoid harsh chemical cleaners, ammonia-based products, and abrasive scourers — these can strip or dull the finish.
- Avoid silicone-based sprays and polishes, as they can build up and interfere with future maintenance coats.
- Avoid placing the piece in direct, prolonged sunlight, as UV exposure can fade or dry out timber over time.
- Avoid placing hot items (mugs, dishes, pans) directly on the surface — use coasters, trivets, or placemats.
- Avoid dragging items across the surface, as this can scratch the finish.
Maintaining the Finish
- Osmo Poly Wax Oil is a maintainable finish — small marks and light wear can usually be spot-treated rather than requiring a full refinish.
- Every 12–18 months (or sooner in high-use areas like tabletops), refresh the surface with a thin coat of Osmo Poly-x Oil or Osmo Wax Maintenance products, applied with a lint-free cloth and buffed lightly once dry.
- For scratches or worn patches, a light sand with fine sandpaper (320+ grit) followed by a spot coat of Osmo oil will usually blend the repair in well.
- Always test any cleaning product or maintenance oil on a small, inconspicuous area first.
A Few Notes
- Solid timber will naturally expand and contract slightly with seasonal humidity changes — this is normal and part of owning a solid wood piece.
- Colour and grain will vary from piece to piece, and timber will mellow and develop character with age and light exposure.
- Keep your piece away from heating vents, fireplaces, and air conditioning units where possible, as constant airflow and temperature swings can dry out the timber over time.